Product Features
1. It is colorless and transparent, and after being applied, it will not damage the original decorative effect of the wall surface, nor will it yellow or attract dust;
2. It is resistant to heat, ultraviolet rays, ozone, acids, and alkalis, and has good adaptability to temperature changes;
3. The coating film exhibits good film-forming properties, is soft and tough, and can resist the stress generated during deformation and cracking of the substrate;
4. Water-based and environmentally friendly, easy to apply, can be directly sprayed, painted, brushed, or scraped onto the wall surface;
5. The film formed exhibits microporous breathability, making it suitable for thermal evaporation in humid climates of the south, and it does not bulge.
scope of application
1. Waterproof repair for leakage on the exterior walls of various buildings;
2. Applied to waterproofing at the interfaces of various decorative materials.
Usage
1. Clean the wall base layer, but try not to damage the original surface gloss as much as possible;
2. When painting the joints of decorative tiles, be particularly careful;
Generally, 2-3 coats are sufficient. When applying, ensure that the previous coat is dry and not sticky to the touch before applying the next coat, and the application direction should be crisscrossed;
4. During the construction process, if the viscosity is too high, add an appropriate amount of clean water to dilute it, and mix well before use;
5. Reference dosage: 8m²/kg/application.
Storage and transportation
● It must be stored in a sealed manner in a cool, dry, and ventilated warehouse at a temperature ranging from 5℃ to 35℃, with a shelf life of 18 months;
● It is normal for sediment to appear during storage. Please stir well before use, as it will not affect the quality;
● This product is water-based and classified as non-hazardous, non-flammable, and non-explosive. It can be transported as general cargo. During transportation, it should be protected from exposure to sunlight, freezing, squeezing, and collision, and the integrity of the packaging should be maintained.